Base cabinets may have a single door, double doors, a series of drawers, or a combination of a drawer and doors; It all depends on your design needs.The standard size of a base cabinet is 34.5 inches tall without the countertop and 36 inches with the countertop. First let’s look at the sizes of base cabinets.

The standard width opening for modern refrigerators is 36 inches, with this in mind, refrigerator manufacturers produce all current model refrigerators to be less than 36 inches wide. Refrigerator Door Measurement. The Frigidaire 36" side-by-side refrigerator/freezer I installed in my home measured 35 5/8" at the front, back, and top, so I made the opening 36" wide. Much of this is determined by how the electric ice-box is designed. In standard kitchens, the wall cabinets are typically 30 or 36 inches tall, with the space above enclosed by soffits. These cabinets need to be very sturdy in order to form the base for your countertops. April 29, 2012. When I went to install it, I discovered that the sides are ballooned out about 1/2" so that it was a press fit in a 36" opening. Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more. Also the life expectancy of a refrigerator … ... With built-in refrigerators it's not finding the size to fit the opening that's the problem. Refrigerator Cabinet Dimensions A discussion of the practical and esthetic choices around boxing in a refrigerator. Many refrigerators need to be open to 90 degrees or more to allow full access to vegetable and door bins. Don’t get the refrigerator opening too small when you are installing your cabinets.

Where the cabinets run all the way to the ceiling, 48-inch cabinets are the logical choice. It's when people want bigger refrigerators.

Whether you are envisioning a bottom-freezer, top-freezer, side-by-side or French door model fridge, you can expect a standard fridge to have exterior measurements that range from 28 3/4-inches to 39 3/4-inches in width, 61 3/4-inches to 71 1/4-inches in height and 28 3/4-inches to 34 5/8-inches in depth. Most are 35 3/4 inches or less, this allows for the refrigerator to slide into the allotted space. Base cabinet widths also range from 9 to 48 inches, just like overhead cabinets, but the standard height of a base cabinet is 34 1/2 inches. Standard refrigerator dimensions vary depending on the type of refrigerator. Even though the space-size may appear to be large enough, some appliance doors will scrape against the wall if there’s not enough room. Common wall cabinet heights are 12, 36, and 42 inches. IMPORTANT!

When it comes to the door opening of a new refrigerator, you need to think about how far the door will open and fill the space of your kitchen. A 12-inch or 15-inch tall cabinet fits neatly over a refrigerator.