When the spring on this valve weakens over time, the valve closes unnecessarily with normal flow and chatters. The Top Filter Housing on this refrigerator contains some sort of Excess Flow Check Valve to prevent water flow if there is no filter installed. If the water inlet valve is defective, or if the water pressure is too low, the water valve will not open. If the water valve is faulty, it may simply be that it is worn out from use. When a valve is open, the medium flows through the valve at a certain speed. Model LFX28978ST/02. This is a common repair. LG Electronics AJU72992601 Refrigerator Water Inlet Valve Enterpark Only Factory OEM Replacement part Water Inlet Valve AJU72992601 for LG Refrigerator Compatible Water Valve Assembly for LG LFX25960ST, Part Number 5220JB2009A, Part Number EBD60664501 Refrigerator Ultra Durable AJU72992601 Refrigerator Water Inlet Valve Replacement Part by Blue Stars – Exact Fit for LG …

All you can really do is replace it. If the flow is abruptly stopped by rapidly shutting off the valve, pressure builds up due to the momentum of the moving medium and this causes a short pressure surge. Source: Appliance Tech 16+ years If water is dispensed, the water filter is the issue. You are testing for continuity and should receive a reading of 200 to 500 ohms. At one time, this was typically done with 1/4-inch bendable copper tubing that was snaked from the refrigerator to the nearest source of water and tapped into the water line using a saddle valve or other type of fitting. The Catch-All® Filter-Drier will retain much smaller particles than a conventional strainer. Check the water supply line running from the back of the appliance to the shutoff valve is kink-free and straight as possible. Use a Sporlan strainer for water applications upstream of every industrial solenoid valve. Newest products, latest trends and bestselling items from Singapore, Japan, Korea, US and all over the world at highly discounted price! Purchase a filter online. kenmore elite refrigerator model 106 45423800. replaced water filter with new filter (kenmore pur 9030) and now no water dispenses or ice being made. Low Water Pressure from House Supply If you do not locate any leaks, disconnect the water inlet valve and remove it from the refrigerator to test it; Set your multi-meter to the Rx1 setting and touch the terminals with the probes. Water inlet valves require a minimum of 20 psi to function properly. tried unplugging frig and then plug back in. have been doing so off/on for a couple days. This water inlet valve assembly (part number 242253002) is for refrigerators. Pull the water line that is located on the valve that feeds the water to the reservoir located in the fresh food section of the refrigerator. The tray fills up with water and freezes but won’t dump ice into the bin. Water inlet valve assembly 242253002 supplies water to the ice maker and water dispenser in the refrigerator. Running a water line to a refrigerator to supply its ice maker and drinking water dispenser has never been easier. Valve is oversized. In this instance, you'll need to replace the valve to stop the leak. Your water valve could require replacement if water is continually dribbling from the dispenser. when the water valve is open it is chattering and the noise is traveling thru the water piping to the tank behind the crisper I suspect. Carefully move the refrigerator away from the wall with the help of a friend. Watch the valve as the water dispenser is depressed. The water inlet valve opens to supply water to the dispenser. Make sure that the water pressure to the valve is at least 20 psi. Failure to close .