In many washers, a small sock or other piece of clothing can get between the clothes tub and the outer tub that holds the water. Your appliance may differ depending on the manufacturer and model. I ended up pulling it apart and replaced the agitator dogs, motor coupler and the washer drive. Step by step instructions on how to replace a Drain Pump for Kenmore 665.13213K901 Will not drain #AP6020066.

However, that didn't seem to fix the problem. A number of different specific problems can cause these general issues, and diagnosing them can be a tricky business. Now the washer will not drain. well im not much of a mr.fixit, for the most part, i took the washer apart, checked all the hoses, from the pump to out the back, and there are no clogs, the water is just sitting in the tubes, now nothing has changes with the hoses either the same set up since we moved in. It spins, but doesn't pump If your washer spins but doesn't pump the water out, the drain line is probably clogged.

There is nothing in the owners manual about this problem. If you see that your washer dryer won’t drain or, to the contrary, continues to drain, you can find this symptom and see the possible causes. In many washers, a small sock or other piece of clothing can get between the clothes tub and the outer tub that holds the water. Common complaints are covered, such as wash quality problems (spotting, filming, etching, etc. It spins, but doesn't pump If your washer spins but doesn't pump the water out, the drain line is probably clogged. When water doesn’t properly drain, your clothes may come out dripping wet. It's also common for a small sock or other article of clothing to get caught in the drain pump or in the drain hose. A stuck float switch, newly installed garbage disposal or a malfunctioning motor are other reasons a Kenmore dishwasher will not drain. I would remove the drain plug from the filter at... - Kenmore Elite HE3 Washing Machine Here you can find different problem descriptions like thumping sound dryer not starting. Don't think it is lid switch, as it clicks when pressed with a screw driver. The next problem was when I put it on drain/spin, it acted like it was out of balance, so I rearranged the clothes, but still not working, so I took the clothes out, but still out of balance. I've followed all recommended steps from the manual. How to Replace Drain Pump for Kenmore 665.13213K901 Will not drain #AP6020066. The washing process within your machine includes water draining from the drum in between the wash and spin cycles. My Kenmore Ultra Wash dishwasher (Model 665) is not draining completely and leaves lots of water in the tub.