While it’s not a common occurrence, a couple of issues can pop up occasionally when the unit runs on a daily basis. Originally thought maybe ice thickness control went bad but that wasnt the case. Icemaker was fine … 500 Premium Member. Thanks . The electronic ice maker in my GE side-by-side (GSS25XSRESS) stopped harvesting ice and was always presenting with the blinking LED.
When the machine doesn’t enter this mode, look for the following: Uneven freeze pattern on evaporator – An uneven freeze pattern can be linked to different factors.

The temperature in the freezer may not be cold enough (below 10 degrees). They manufacture some of the top ice makers in the foodservice industry, ranging from undercounter to standalone S models. Ice maker not harvesting the ice 106.56532400. Gotta jump in here, haven't worked on an ice machine in years, I had the same issue with a Manitowoc once, would make ice great, no harvest, the company before me used an acid based cleaner on it and removed the nickle coating on the evap, all it would do was make ice then melt it, the ice would not release.

Any help would be great! How can I fix this and test the different components to get this fixed. Use a plastic utensil to break apart the jammed ice. A newly installed refrigerator may need up to 24 hours to cool and for ice production to begin.

Working on a manitowoc ice machine model #ib1024yc.

The pressure of your homes water supply can also have an impact on whether or not ice is made.

(For triggering instructions, see the sections below about your brand.)

Sometimes, the harvest fingers bring up icy water that attaches to the stripper. I had to order the electro-mechanical ice maker (WR30X28702) replacement since … Staff member. Q-1300 series barely harvesting, sometimes not at all.

The harvest cycle starts when ice is ejected from its ice mold. Ice in maker but will not harvest.


This icy water then freezes on the stripper causing the harvest fingers to jam. The electronic ice maker in my GE side-by-side (GSS25XSRESS) stopped harvesting ice and was always presenting with the blinking LED. Ice maker makes ice slowly or not at all.

Kenmore side by side by side refrigerator not harvesting the ice. Been searching and reading the forums and can't find my specific problem answered so here goes. 2- the area were the harvest assist pin is located had less ice buildup, therefore allowing the pin to push thru even though the complete ice was not ready for harvest.

Once i thawed out evap unit went into freeze formed ice and went into harvest. Jake Appliance Tech - Admin. It was about 15-20F outside, unit has remote condensing unit with headmaster and fan cycle control. What To Do When An Ice Maker Stops Working. Remove jammed ice from the ejector arm using only a plastic utensil so the ice maker is not damaged.

So I ordered up a new ice maker since most topics stated that if the water valve was working and power was present, the ice maker needs replacement if it doesnt harvest. 2- the area were the harvest assist pin is located had less ice buildup, therefore allowing the pin to push thru even though the complete ice was not ready for harvest.