Replacing the Ice Maker Shut Off Arm (Whirlpool Part # WP2304354 ... Ice Maker Not Making Ice / Whirlpool / … The handyman Journey 454,520 views

unplugged, replaced.

Unplug the refrigerator.

As ice accumulates in the bin it prevents the arm from dropping back down.

Remove the ice bin from the refrigerator and remove any loose ice from the ice maker… Ice switch is "on", the entire fridge has been reset; i.e. When the arm is high enough, the ice maker shuts off and no more ice is made until the ice … It hangs up between the edge of the icemaker and the wall in the icemaker cabinet. The ice is made and pushed out of ice maker, but does not fall into the bucket. The sensor arm in the ice maker is staying in the off position. The ice cube compartment will remain cold. if I catch after the first cycle or two, I can just reach up and touch the cubes and they fall.

The ice maker control arm is designed to sense the level of ice in the ice bin. Remove jammed ice from the ejector arm using only a plastic utensil so the ice maker is not damaged. During each ice making cycle, the arm rises up and then drops back down after the new ice is dumped into the ice cube bin. Next. The the ice maker module is bad. If you push it down manually it makes ice and tips it into the bin but the arm stays up … read more

The module is the tan part under the white end cap. Ice maker not making ice.

Keep in mind the ice maker will also turn off automatically when the ice container/bin is full.

Ice Maker Stopped Working Control Arm Out of Position. Still no ice… Waterline has no pinches in It. If it is set too high, you may just just have it set to make too much ice for your needs. Ice Maker Repair: Ice Maker Frozen Up. If you start to lose your cool, call an expert for professional ice maker repair. After I turned it back on ice bin rotated as if it was dropping ice, and the arm moved up and down. Ice Maker Not Making Ice / Whirlpool / What To Check and How To Fix - Duration: 5:27. push the swing-arm in the up position until it clicks. Just seems like arm is not "catching" or locking in up position.

Once the ice bin is full, the control arm will turn the ice maker off until the ice level is lowered. The sensor arm in the ice maker is staying in the off position. When the ice maker gets stuck in the up position, there is no way to fix it without replacing the whole ice maker.

Water dispenses fine.

Arm movement doesn't seem restricted. Answer Down Arm = On (dOwN) Up Arm. Our chat service hours are Monday - Friday from 8 a.m. - 8 p.m. Saturday from 8 a.m. - 4:30 p.m. EST. Ice Maker Gets Stuck.

... To stop the ice maker, simply lift the wire signal arm until it clicks and locks in the “up” or OFF position. Tried to move it into locked "up" or OFF position, but it would not stay up. If the ice storage bin gets too full or isn’t used often enough, slight melting and refreezing may cause ice cubes to stick together in clumps, making it impossible to dispense them. If your ice maker has frozen up, take the following steps to thaw it out: 1 Unplug the refrigerator or turn off the circuit breaker that supplies power to it.

The ice maker is … First, ensure that ice is not jammed in the ejector arm of the ice maker. Ice Blockage in the fill tube - The fill tube is not the 1/4" tube that goes up the back of the freezer but it is the approx 1" in diameter tube that goes through the freezer and feeds water directly into the ice maker. This ice maker is brand new, out it in about a month ago, still did not make ice, actually the issue was the water intake valve, replaced it, started running fine, but now everytime the ice maker dumps ice, the are goes up, the ice falls into bucket, and the arm stays up …

The control arm may have inadvertently been moved, or possibly fallen off, which can pause ice maker functionality. There are 2 hex head screws that hold the ice maker on.

I have a Maytag refrigerator model no GC2227E1. They should be 1/4 inch screws just over the top of it and sometimes one underneath.

The ice maker will complete the cycle it has already initiated.