You can fit carpet over ceramic tiles, I would suggest to screed over the tiles to give a smooth sub floor prior to laying the carpet, also to have the grippers glued around the perimeter as trying to nail would only break the ceramic tiles and cause more issues, then fit underlay and carpet. 5 Standing on the carpet near the join, pull the edge towards you, so the carpet folds over on itself. Then install the carpet to the vinyl floor piece by piece by bringing it back through the doorway and laying it down in front of you so you have something to walk on.

On the face of it, installing new carpet over the old carpet does have some advantages. If you need two pieces of carpet to fit the width of the room, lay the second length of carpet so that it overlaps the first by about 2 inches. 4. To install carpet tile, draw the sections that you want to carpet on a piece of paper and arrange the tiles in a design or style that you like before you get started laying down the tiles. Lay it so that the edge of the strip that is aimed downward is placed over the carpet.

You could of course also apply the carpet tiles to the plates and then arrange them on the floor.

The post may contain affiliate links, which means I get a small commission on any purchases you make at no cost to you. This assumes that the floor underneath is solid (concrete) and that there are no cracks in the existing tile (indicating underlying problems in the concrete). A family room should be a comfortable place to hang out, watch movies, and sprawl out on the floor. All you have to do is place the strips over the spot where the tile and the carpet edges meet, providing you with a simple and elegant way to bridge the gap between the two types of flooring. If your old ceramic tile is worn or dated, you can lay new tile right over the old, and avoid the huge job of tearing out the old tile. If you have a strong-enough sub floor, this is a viable option. The traditional way of making the tile-to-carpet transition is with the tuck method.

Snap … The next step you need to take is to place a transition strip over the line where the tile meets the carpet.

Next, section off the room into four quadrants and lay the tiles down, starting in … Additional Information For better results, you can use a carpet pad under the carpet. If you aren't removing the old floor, you may be creating a new floor that is too thick for doors to open and shut or for thresholds to have clearance. In fact, pros do … Before you can install carpet tiles, you must prepare the existing floor. Trim the carpet so it protrudes over the tile by about half an inch. And if the existing carpet was glued down, not tacked, it can be a huge time-saver to lay the new carpet over the old. Carpet tiles are colorful, versatile, and easy to install, making them the perfect comfort flooring option for homeowners and renters interested in do-it-yourself projects. One of the biggest factors of installing a new floor over the old is thickness. It saves on the cost and labor of pulling up and disposing of the existing carpet, keeping carpet waste materials out of the landfill. By going over the tile you'll create a height problem when it comes to marrying up with any other flooring you have in the house. Mount Tack Strips to Sub-Floor. Available at stores like Home Depot and Lowes- these peel and stick tiles are available for less than $1 a square foot. What I love about it: The price is super reasonable and the look of the products have come a long way. After you've mapped out your room (taking measurements) and you've purchased the plates and the tiles, you can arrange the plates on the floor first before you start nailing the tiles to them.