Finish the joints with drywall tape and several coats of drywall compound. Remove the door and then install drywall over the door pocket, using construction adhesive and 1-inch drywall screws. We also install door lites in your existing door enhancing your entry without replacement of entire door. e.g. Then cut the exposed studs to make room for the new framing.
See the article 'Replacing a Pocket Door' for instructions on what to do. To install a pocket door, start by removing the existing door and the drywall on one side of the wall.


Attach the Door. And, other than the final install of the door onto the hardware, when I enlisted the help of my husband, I did this entire project, from framing out the old door opening to installing the new pocket door all by my lonesome. Hopefully you were able to get your pocket door removed without too much difficulty. We also install pet doors through screen doors and doors and walls of any material. And although I was really nervous about it at first because it just seemed like one of those projects that could go very wrong very quickly it actually went great.

Score Around the Door Trim .

To install a pocket door, start by removing the existing door and the drywall on one side of the wall. Reinstall the door and then install the door guides on the inside and outside of the door at the mouth of the pocket. To prevent the trim from splitting when you remove it, carefully score around it with a utility knife to break the polyurethane seal. Be sure to screw the brackets into the studs! Next, install the slider track using the rails that came in your pocket door kit. Install the Brackets. Next, install the slider track using the rails that came in your pocket door kit. How to install a pocket door track. We provide sound installation methods and only the highest quality for your pet door and pet screen door. Step 4 attach door to the wheels. Putting the Pocket Door Back On. Pinterest; Facebook; Twitter; Email; Step 1 replacing the old pocket door. Install the track assembly, which is the track pre-mounted to a wooden header, by driving flat-head nails into either side of the frame at the height of the door plus ¾ inch for finished floors or plus 1½ inch if you’re installing above a … Step 2 remove trim with small prybar. When you hang the new drywall that will hide the pocket door when it's open, you'll attach the drywall to the exterior (wood) side of these split studs.

wood, metal, stucco, drywall, brick, masonry, etc. Similar to removing the door, it is a bit of a trick to get the door back on. Step 3 DTTR-209_Brackets-on-pocket-door_s4x3. Then cut the exposed studs to make room for the new framing. DBA Door Renewal And More LLC Removing a Pocket Door - Summary. Remove the Trim. Doors Removing Installing Bathroom Maintenance Repairing. Be sure to screw the brackets into the studs! Attach the hanging brackets to the top of the door and slide the wheels into the track.